Land Cruiser Rear Glass Replacement

We’ve had a lot of questions relating to the tools needed on our Land Cruiser Rear Glass Replacement series on YouTube lately. To help out, here’s a list of the tools needed. We have linked the video series below as well. As always, if you have any questions pertaining to these or any of our other videos, feel free to drop them in the video comments and we will be more than happy to help in any way we can.

Tools and Supplies needed for Land Cruiser Rear Glass

  1. Toyota Weather Seal (68291-60050)

  2. Sika Primer 207 and Swabs

  3. 3M Windshield Urethane (08690)

  4. Professional Caulk Gun (highly recommend power gun)

  5. Toyota Factory Touch-up Paint

  6. Alcohol or Acetone Solvent

  7. Painters tape (highly recommend yellow Autobody tape)

  8. PB Blaster Penetrating Oil

  9. 3/16” Diamond Braid Nylon Rope or equivalent

  10. Sand Paper (80-220 grit)

  11. Foam Painters Brush

  12. Straight Razor Blade

  13. Extendable Razor Knife

  14. 8mm Socket 

  15. 10mm Socket

  16. Phillips Head Screwdriver

  17. Flat Head Screwdriver

  18. Pocket Screwdriver or Bit for 3rd Brake Light Clips

  19. Needle Nose Pliers (preferably 90 degree)

  20. Paint Scraper

  21. Wire Brushes (stainless bristled)

  22. Pneumatic Grinder or Electric Sander

  23. Body Filler Squeegee/Wedge

  24. Plastic Trim Wedge

  25. Windex

  26. Paper Towels